PowerPlug ESPHome code

substitutions:

device_name: "athom-v2-plug4"

friendly_name: "athom-v2-plug4"

#project_name: "athom.v2-plug4"

#project_version: "1.1"

relay_restore_mode: RESTORE_DEFAULT_OFF

esphome:

name: "${device_name}"

#name_add_mac_suffix: False

#project:

# name: "${project_name}"

# version: "${project_version}"

esp8266:

board: esp8285

restore_from_flash: true

preferences:

flash_write_interval: 1min

api:

ota:

logger:

baud_rate: 0

mdns:

disabled: false

web_server:

port: 80

wifi:

ssid: wifiname

password: whatsthepassword

# ap: {} # This spawns an AP with the device name and mac address with no password.

# Enable fallback hotspot (captive portal) in case wifi connection fails

ap:

ssid: "Athom plug 4 v2 Fallback Hotspot"

password: "whatsthepassword"

# Optional manual IP

manual_ip:

static_ip: 192.168.178.94

gateway: 192.168.178.243

subnet: 255.255.255.0

captive_portal:

# dashboard_import:

# package_import_url: github://athom-tech/athom-configs/athom-smart-plug-v2.yaml

uart:

rx_pin: RX

baud_rate: 4800

globals:

- id: total_energy

type: float

restore_value: yes

initial_value: '0.0'

binary_sensor:

- platform: status

name: "${friendly_name} Status"

- platform: gpio

pin:

number: 5

mode: INPUT_PULLUP

inverted: true

name: "${friendly_name} Power Button"

disabled_by_default: true

on_multi_click:

- timing:

- ON for at most 1s

- OFF for at least 0.2s

then:

- switch.toggle: relay

- timing:

- ON for at least 4s

then:

- button.press: Reset

sensor:

- platform: uptime

name: "${friendly_name} Uptime Sensor"

- platform: cse7766

update_interval: 10s

current:

name: "${friendly_name} Current"

filters:

- lambda: if (x < 0.060) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected

voltage:

name: "${friendly_name} Voltage"

power:

name: "${friendly_name} Power"

id: power_sensor

filters:

- lambda: if (x < 3.0) return 0.0; else return x; #For the chip will report less than 3w power when no load is connected

energy:

name: "${friendly_name} Energy"

id: energy

unit_of_measurement: kWh

filters:

# Multiplication factor from W to kW is 0.001

- multiply: 0.001

on_value:

then:

- lambda: |-

static float previous_energy_value = 0.0;

float current_energy_value = id(energy).state;

id(total_energy) += current_energy_value - previous_energy_value;

previous_energy_value = current_energy_value;

- platform: template

name: "${friendly_name} Total Energy"

unit_of_measurement: kWh

device_class: "energy"

state_class: "total_increasing"

icon: "mdi:lightning-bolt"

accuracy_decimals: 3

lambda: |-

return id(total_energy);

update_interval: 10s

- platform: total_daily_energy

name: "${friendly_name} Total Daily Energy"

restore: true

power_id: power_sensor

unit_of_measurement: kWh

accuracy_decimals: 3

filters:

- multiply: 0.001

button:

- platform: factory_reset

name: Restart with Factory Default Settings

id: Reset

switch:

- platform: gpio

name: "${friendly_name}"

pin: GPIO12

id: relay

restore_mode: ${relay_restore_mode}

light:

- platform: status_led

name: "${friendly_name} Status LED"

id: blue_led

disabled_by_default: true

pin:

inverted: true

number: GPIO13

text_sensor:

- platform: wifi_info

ip_address:

name: "${friendly_name} IP Address"

disabled_by_default: true

# Sync time with Home Assistant.

time:

- platform: homeassistant

id: homeassistant_time

#time:

# - platform: sntp

# id: my_time